Restaffine Fuji Handle [Fuji NGH Base Handle]
 Restaffine does not manufacture ALM (alumi) handles only, but Fuji NGH handle-based custom handles too, such as Restaffine CR (Cork handle) and RF (Wood handle)

  Preserving the original design patterns there is a selection of grips available: Cork Gun grip, Wood Gun grip, and Cork Straight grip.
At first the base used was a Fuji NGH -12 handle (GA collet), then switched to NGH -15 handle (NA collet) which we use now.


 Custom Finish Guidance

Butt Plate

 There are some reels that you can't attach due to a different reel-foot structure. If so, we can adjust the handle width to your reel and finish the handle with Restaffine original no-slip, mat-black coating.

<加工調整例>

Handle:Reel foot with width adjusted 
Cut adjusting: Custom Mat Black Non Slip coating
Grip:Cork straight 13cm、Front flare Silver ring concept  
rear flare finish
Grip end:Hiker Cork
Butt Plate:Restaffine Standard 

Handle size adjustment + custom coat finish Option charge \5,000

This custom coating (mat-black, non slip) is a option possible for all Fuji Handle based models. A fine embossed non-slip finish.

Customcoat finish only           Option charge \3,000

 About Collets
 The collet used to insert rod butt is compatible with NA or GA + NA-GA adapter only.
NGH-15 handle is out of production from 2005 further on. Please note: models and collets (different sizes) are available as long as the stock expires.
<NA type>
<GA+NA-GA type>
Inside diameter (Rod outside diameter)
11.0mm 14.0mm only
Price ¥100

 GA    NA-GA
Inside Diameter (Rod outside diameter )7.0mm 8.0mm 8.5mm
9.0mm 9.5mm 10.0mm 10.5mm only
Price ¥170
*Please note:NA-GA collet is not sold individually

 Handles -details of each handle-

5mm thick hiker cork (cork fragments and rubber mixed together) is used in all models to prevent cracking.

 
 Cork Gun type (Cork Gun)
 (The base handles below look different in size due to perspective)

CR−A
Single Gun type. The genesis styling and size.
Grip length 11cm 

CR−B  A wave design made to fit fingers. Introduced 5 yrs ago.
grip length 10cm
1cm shorter than original. Concave at the grip end fits the palm perfectly. Single and light, conforms with short rods.

CR−U Semi-double gun type (one & half) The Genesis design.
Grip length 15cm

CR-II is 4cm longer than type A (so the left pointing finger and middle finger can fit in). This helps reducing the extreme strain to the wrist. Also, hanging the half part outside the wrist helps to increase single hand fighting power. Conforms with middle and heavy rods.

<Handle prices> Cork grip type
Cork Gun Type
CR-A (グリップ11cm) weight
CR-B (grip10cm) weight
CR-U(grip15cm) weight
Standard finish
 \7,000    約153g
 \7,000     約144g
 \9,500     約159g
Custom finish
 \10,000
 \10,000
 \12,500
 
 Wood Gun type (Wood Gun)
<Grip finishing color>Above:Olive、middle:Red Brown(original color)、below:Light Brown
RF−A  The Genesis design
Grip length 11cm
* The Handle's wood material makes changes from the Genesis. Right now, Manchurian Ash is used (material used to make bats) for its beautiful patterns and chipping prevention. Please choose the base handle finish (if custom coat needed or not) and the wood grip finish color when ordering.

RF−B  A wave design made to fit fingers. Added 15 yrs ago.
grip length  10cm
1cm shorter in length than the original. The concave at the grip end fits the palm perfectly. Single and light, conform to short rods.

RF−U  Semi-double gun type The Genesis design.
grip length 15cm

RF-II is 4cm longer than type A (which the left pointing finger and middle finger can hook) which helps to reduce burden to wrist extremely. Also by hanging the half part outside the wrist can increse Single hand fighint power. conform to middle and heavy rods.

<Gandle prices> Wood grip type (changes in color will not take any charge)
Cork Gun Type
CR-A weight
CR-B weight
CR-U weight
Standard finish
  \9,800  約178g
  \9,800   約161g
  \12,800   約208g
Custom Finish
  \12,800
  \12,800
  \15,800

 Cork Straight type (Cork Straight)
(The size available could be seen from tje A,B,C in the picture below)
CST 11cm,13cm,15cm,19cm,21cm,23cm
(Picture on the left is CST-13cm Custom coated)

CST−25 Standard
* Semi-double grip length 25cm

CST−30 Standard
* Double gri length 30cm


<Handle price> Cork straight grip type
Cork Gun Type
CSTー11,CSTー13,CSTー15
CSTー19,CSTー21,CSTー23
CST-25 (semi-double hand)
CST-30 (double hand)
Standard finish
\5,500
\5,800
\6,900
\7,000
Custom Finish
\8,500
\8,800
\9,000
\10,000
23~24mm hiker cork is attached at grip end.

Please note: Tax not included in the prices above.


REVOLUTION series 2002〜
Sherwood
Xanadu
Limberneck
US TOURNAMENT series 2002〜
Destiny
Killer Widow
Viva California 242
Agua Milpa
BIG BAIT series
SENTINEL
Minnow Jack
RCX / RC-60
BORON series
Colonel / General
BORON
LIMITED series

Silence Breaker
Twilight Tight
Great Impulse
Memorial Shadow
CARBON series
Shooter
Hunter
Sniper
Questions or comments  ……… TEL:077-592-8121 FAX:077-592-0107 E-mail:restaffine@iris.eonet.ne.jp